Fender rolling services

I bought an Eastwood fender rolling and may be offering fender rolling services in the near future. Let me know if you are of interest. thank ya

 

Come roll mine flat for practice

 

Don't need the practice but could prob help you out.

 

Maybe me this spring!

 

Sounds great Ryan

 

Awesome. May need some rolling in the future. Planning to pick up a new ride in the next yr or so. Do you know at what point people are needing to roll on a 08+ stock STi suspension? I realize this depends on wheel choice, offset, etc. but a generic answer at this point would help me out with future decisions (daydreaming at this point).

 

18x9.5" with 265/35R18 is the standard for "big" wheels on the 08+ STI. On stock suspension you may or may not rub. Lowered you will need a minor roll in the rear.

 

Thank you. So essentially staying with 255's at widest will inhibit the need to roll.

Starkall - abouts how much would you charge for a service like this?

 

I had 18x9.5" with 245's (Starkall's old orange wheels) and rubbed in the rear on stock WRX suspension. It's really going to depend on your offset as well. I believe these were +34.

 

18x9.5 +44 offset with a 265/35/18 is about the most aggressive you can go on stock suspension. It will rub a tiny bit on hard bumps. But I'd say a 18x9 or 9.5 with a 255/35/18 and plus +38 offset is the best aggressive looking offset, don't poke out and requires a medium roll in the rear. Will require front fender work if you try to slam it. But if you just do a slight drop a medium rear fender roll would be great. PM me for pricing

 

30 series is a bit narrow. Are you sure you don't mean 35?

Here's a whole thread on the topic:

http://forums.nasioc.com/forums/showthread.php?t=2155863

 

Thanks guys, just brainstorming for future plans. What's a ballpark figure to roll f&r fenders?

 

Ya I meant 35 Ben. I edited it right after I posted it. Lol

 

Great help. I got to page 3 aaaand my work day is over. The continued reading will have to wait until more downtime tomorrow.

 

Bumping this up, do you have an estimate for all 4 wheel wells?

 

Sorry been busy with other crap. $50 a Fender.

 

where ya located? i would like to get my fronts rolled on my neon!!

 

Willmar. But that can be worked out

 

I can be in the cities this weekend if anyone needs fender rolling.

 

use heat??

 

Yes