Need security system help

Discussion in 'General Subaru Discussion' started by bluebaru06, Aug 16, 2005.

Thread Status:
Not open for further replies.
  1. bluebaru06
    Offline

    bluebaru06 New Member

    Likes Received:
    0
    Trophy Points:
    0
    Ok, tonight I removed the turbo gauge to color the led so it wasn't so distracting. When I put it back in the light would not come on and my security system goes off after 3 or 4 seconds when I start the car. I've tried dissarming the security system but it won't dissarm.

    I could use some help cause I can't drive my car till the security stops going off.
     
  2. Speedemon
    Offline

    Speedemon Well-Known Member

    Likes Received:
    37
    Trophy Points:
    233
    Turn the key on and off over and over till it goes off. That might do it.
     
  3. bluebaru06
    Offline

    bluebaru06 New Member

    Likes Received:
    0
    Trophy Points:
    0
    That turns it off after it goes off but it goes off every time I start the car...any ideas?
     
  4. bluebaru06
    Offline

    bluebaru06 New Member

    Likes Received:
    0
    Trophy Points:
    0
    OK, part of it is the shock sensor. Aparently the shock sensor also goes off if a wire is cut or it thinks a wire is cut like when I disconected the plug to the led in the back of the turbo gauge. Problem is that the guage light won't come on now and the sensor goes off every time I start the car.
     
  5. AWDimprezaL
    Offline

    AWDimprezaL has more posts than you

    Likes Received:
    1,818
    Trophy Points:
    573
    yeah, warranty buddy...its a 2006
     
  6. bikerboy
    Offline

    bikerboy Subie GOD Staff Member

    Likes Received:
    94
    Trophy Points:
    233
    reset the ecu
     
  7. TheWRX
    Offline

    TheWRX Well-Known Member

    Likes Received:
    0
    Trophy Points:
    201
    wow, ur already messing with it... :?
     
  8. bluebaru06
    Offline

    bluebaru06 New Member

    Likes Received:
    0
    Trophy Points:
    0
    I wouldn't catagorize unpluging a plug as messing with it. All I did was remove the gauge by pulling it out of the boot and unplug it at the rear.

    I'm just confused.

    I rest the ECU, that took care of the security issue. I guess that's why the first line of each maintenance issue starts with "disconect the battery". Never knew the ECU kept track of so many things.

    Thanks Bikerboy, I owe you a beer.
     
Thread Status:
Not open for further replies.