turbo inlet for ej22t?

where can i get a turbo inlet for the ej22t? i wanna run an inlet straight from the turbo to the maf sensor and add a filter, but i cant find anything on it. any info will help. or, better yet, if someone can make me one, that'll be awesome. thanks

oh, im currently running a TD04 on my EJ22T.

 

You need a 90* inlet td04, that will be the only way it will work correctly.

 

Well you could use a silicon 90* pipe, i had no problems using it until i got my 90* inlet 16G. Its not ideal and depresses on the intake mani a bit but it works

http://s31.photobucket.com/albums/c389/Threshld1/93%20Legacy%20SS/Turbo%20Stuff/?action=view&current=P4080022.jpg

But as Erik said the 90* inlet is best if you can find one.

 

aight, thanks. does that green hose runs from the big intake box thinging to the bov area?

 

Ney that was a temporary fix for a broken F pipe. Goes to the rear crank breather

 

hey, you think you can take a look at mine setup and see if i did it right?

 

What you really need is a JDM TD04 which had the 90* already built into it. (see below)

This is what I whipped up with the legacy 90* piece.



To be honest you will have to find one used, and the condition of it will be questionable at best. I have had 2 so far and both of them have cracked or had other issues which would result in air leaking in after the MAF sensor.

The 90* TLeg intake piece wont do much unless you can get that initial 90* off of the turbo.

 

coolness, i will look for one, thanks