2003 SRP WRX 265k miles non-running $2000

Finally ready to sell my WRX. I burned several exhaust valves in November of 14 and had a friend replace the heads. We had a head gasket failure and I replaced the block with one that was claimed to be around 130K. I was almost done re-installing the motor when the turbo oil feed banjo bolt pulled some threads out of the block.
It would require a custom bolt (a double banjo may work, idk) or a heli-coil. I no longer have a place to work on it so my loss is your gain.

Details:
2003 Sedona Red Pearl WRX
265K on body (I put on 220k myself)
17" koenig feathers - gold
Header, downpipe, catback exhaust
SPT short ram
Stage 2 tune by Bullwinkle
GM BCS
Prodrive springs
Whiteline front and rear sway bars
Clarion double din touchscreen.

Car will be on the south side of Rochester and will need a flat bed.

 

Sorry, the pics failed to attach.
https://www.dropbox.com/sh/g17c06drrfxoyur/AABo3s12rESfasUzJG7aHdo7a?dl=0

 

Dropbox can be a fickle b****. Just right click and choose "copy image address". You can then paste that specific URL into the 'Image' button here (In between the Smilies and Media buttons).

Lastly, GLWS!

 

Thanks!

 

Does it run?

 

Read title.

 

As far as you know it only needs the turbo oil feed repaired and finish re-assembly, correct?

 

Correct. I cannot guarantee anything but it should be the only major issue.

 

To be fair I was told to ask by someone else

 

Bump! Help me offload this before moving day!

 

Sold!