anyone got a bell housing bolt?

got an 03 subaru, one of my bell housing bolts was damaged, anyone got one for me?

 

You could just buy one at the dealer. Or a hardware store.

 

I've got a big bin of them. You can have it if and when you come get the wing? LMK.

 

have to wait for shipping with the dealer... gone to a few hardware stores, nothin. Terry, i would have scooped the wing already but heres the delima. i cant get to you without my car, i cant drive my car without said bolt. sooo im stuck unless you want to bring the bolt and wing to bloomington

 

Nick,
Not trying to be a smart ass, but you can operate your car with one bolt missing, at least long enough to get a replacement. I would recommend against any erratic driving though. We can put the bolt in when you get here. I have seen these cars with just 2, that's right only 2 bolts in them (actually mine when I got it). If you feel up to it I am home all day and can help. You can then look at the intercooler and other parts you had interest in too.
Just trying to help, but I can't get away today. You still have my number?
Terry

 

Just leave the missing one out on the driver side. Just below the starter. Then you can easily install it later.

You should have no problem finding a proper size/length Grade 8 bolt at any hardware store.

 

after searching, this is the size:
M10x1.25

 

ive looked for that size from 2 diff places, and homedepot.

 

Drove mine for 2 years missing 2 of the bolts no problem.

 

Ace Hardware will have plenty of them.

 

Run with out. Stage 1 weight reduction.

 

i know i can run without. i just like everything how its supposed to be. got it figured out and my transmission connected thanks to terry! thanks again