I'm clearing out a lot of random stuff I have lying around. I'll add pics soon, but I just want to get a running tab of stuff first. Pics will pop up over the next couple days. I may add some more items as well if I remember more stuff. I'm rather certain I'm missing something. Audio: Dayton RS52 2" dome midrange (Pair) - $60They're brand new, never run. I got them for a planned 3-way project but ended up going a different route. Dayton 4" port hardware - $40 for allAgain, me thinking ahead of myself and not ending up doing what I thought I was going to do. :laugh: (2x) 4"x 15.75" straight section 4" coupler ring 4" outside flare 4" male to female elbow It's good for a L shaped port and a nice flared exit. It's sufficiently long for most enclosure designs, up to around 35" total. Car Parts: 13mm stock Forester rear swaybar - Free Frankly, I don't know what to do with this. Someone can have it or it gets tossed. 17mm stock WRX rear swaybar - $20This was my first upgrade from my stock one, got it from a local member. I later purchased a new oem 20mm to replace this one. It's a good first upgrade item that will certainly do better then the stock twig on any Forester or Impreza Kartboy short shifter (sorry, no bushings)- $50I ran it for a couple years, but I went back to the stock lever, just preference in ball location for how I sit and where I reach. This plus a LatheWerks stainless knob (I like heavy knobs) would rock pretty nicely. Kartboy shift knob - $20I ran the stock knob, so I never touched it. I think I put it on once to see how it felt. I later went to a Greddy Counterweight (I like heavy knobs ). 2.2L, single port exhaust heads, ported by Fuji K - $50I bought these as a plan for future cam work. These were curley's heads. Unfortunately, no one once mentioned them being a single port exhaust head. So...these are up for sale. If any single port exhaust guys want some ported heads by our local porting master Fuji, then here ya go. My hopes were crushed, but yours don't have to be. :laugh: 2.2L intake manifold, was paired with the heads - $20 I bought the heads and intake manifold together. I was going to use the intake manifold to having it P&Ped at Grimmspeed. Unfortunately, I too thought this was a 2.5L piece or at least identical to one. It is not, so more crushed dreams. Forester struts, worn (FL blown, FR good, RL no gas, RR no gas) - freeThese would be great for anyone planning a Koni swap, Forester or Impreza owner. I have zero use for them. Someone take them or they're getting tossed. Forester stock springs - 157 lb/in Front | 118 lb/in Rear - $30Maybe an Impreza guy gets the lift bug. I've got no plans for them. Camera/Camcorder: Fujifilm Finepix S3000 camera (3.1 MP), case, access. - $75 I don't know a lot about this camera, seems to go for around $50 used, $100 refurb. The carrying case is nice, and comes with USB connector, wall charger, spare batteries + charger, 512 xD card. I could split items if you just want the camera or just the case. Canon ES55 8mm camcorder - $100It was a $300 camcorder back in the day. Other then the graphical limitation of the 8mm format, it's a pretty nice camcorder. It has image stabalization, 22x mech. zoom, 500x digital zoom, decent mono mic pickup. It's just a really good functional camcorder. It's just a little outdated being 8mm in a solid state world. I'd hang onto it, but I do most of my recording just with my camera these days although the Canon is functionally superior. It'll come with the charger and two 8mm tapes. Sorry, I've got no carrying case for it. Computer parts: 1 GB DDR2 667MHz Corsair laptop ram (new in box) (2x) - $30 ($15 each)Good for upgrading an old laptop if you've only got 256mb or 512mb in the thing. Of course, check to make sure what type of ram your laptop uses first. 2.6ft Retractable USB 2.0 cable, A Male/B Male - $5Kind of a specific item, useful for some printers, portable drives, etc. D-Link DCM-202 cable modem - $50Got a cheap cable modem from your cable company, always freezes or locks up? This might be a nice upgrade. Supports up to 38Mbps download, 30Mbps upload. This is another item a friend of mine bought and doesn't use. His previous appartment had a junk modem, so he bought this. He's in a different appartment now, so he's got no use for it. Electronics: Navibe Bluetooth GPS Receiver - $50It works slick if you need a receiver. I've used one (same, not this specific one) with my laptop. Again, it's a friend item. He bought a few of these as x-mas gifts. This is his own, but I almost want to say he's never actually used it. My only gripe is that it uses Bluetooth as the connection to the device (laptop, PDA, phone, etc.) but has a USB connector. However, the USB is only for charging the battery and can't be used to connect with. It's not helpful when your laptop (my current one) doesn't have bluetooth. :laugh: Otherwise, it's worked flawlessly. Both I and my brother have used ours numerous times, operates for a good length of time, no trouble picking up satellites even when tossed randomly in the car somewhere. Miscelaneous: 30ft-50ft roll of optical cable - $40Well, I want to say it's 50ft. It's bagged up, and I really don't want to unroll it to check. Another friend sale. He bought it for some reason. I don't recall what. Norelco Speed-XL (8140XL) (new in box) - $60This was an item I got on eBay as a x-mas gift for my brother. My mom bought him one too. :laugh: So, I've sort of had this sitting around since. It's a cool razor, full cutting head (instead of just the little outside ring). The Speed-XL has been a well liked model, basically any Norelco with the full cutting head is a well liked model, basically the Speed-XL, Touch-XL, and new Artic-XL or whatever it's called. I own a Touch myself. :ugh: :laugh: Payment: Payments of most types work: Paypal, cash, check, whatever's convenient. I think this is pretty self-explainatory. Getting items: Pick up is preferred, but a number of you don't often venture south of the Cities. I do occationally head up to the Cities or partake in auto-x, rally-x, or other get-togethers. Something could be arranged. I'll make a trip up to the Cities if you buy me lunch or supper for my troubles. :laugh: I can ship items if you want. The short distance should keep pricing reasonable, within $10-$15 for most items, FedEx generally, less smaller that can be shipped vial USPS ($2-$3). Um... That's all for now. I'm sure I'll find new things to add later. Basically, I'd like to try and sell what I can locally. What doesn't go in a week or so will make its way on eBay and elsewhere on the internet for more global selling.
I would assume so. You may want to give Kartboy a quick e-mail or PM on Nasioc and ask. This was for a 2002 Forester. They have a product specific to Foresters. However, these cars run all the same hardware. The tranny on your WRX is the same. The interior's about the same. The shifter is still the ball type connection. There may just be some slight variation in length or connection point. A quick talk with Kartboy should clear it up. The web site doesn't say a whole lot. At the most, the Forester specific model may be 2" longer. It's significantly shorter then stock. However, the sedans may run a shorter shifter then the Forester. You will still get a shorter throw, but you may not get the 40% reduction Kartboy designs for. I could take measurements, but the shifter's at my brothers house right now, same for most of my oem parts like shocks, springs, sway bars. The shift knob is aluminum, pretty light. Silver one. I've got the stickers that came with it too, untouched. I can take pics once I get over to my brother's house sometime this week.
Ok, took some pics. I can take more if you want. Canon ES55 camcorder Norelco SpeedXL razor Optical cable Fujifilm S3000 camera and accesories PC/electronic hardware: cable modem, GPS, USB cable, laptop ram Speakers: Vifa TG9, Dayton RS52 4" port parts SOHC heads, single port exhaust
Hmm ... I'll have to keep these spkrs in mind when I'm closer to attempting 3-way in my rs, if they're still around.
That was my intention at first. I have yet to do it though, and I've had other ideas pop in my mind. Right now, I really just don't want to step to a more extensive setup since I do auto-x/rally-x the car. I don't really want to put hardware in that I can't afford to damage, and my midbasses that I was planning to put in are not ones I can afford to break as they're no longer made anymore. If you see anything you like, I can bring it up with me when I look at your seats, PMed you back about that. A note to others, This might be a good time if you do want something. I'll be up in the Cities anyways, so I could stop by and drop stuff off to a couple people.
Little bump. If anybody has any questions about anything, shoot. If you want more pics of anything, ask. I'll do what I can to satisfy any concerns/interest you have about any of the products. I haven't added to the list yet, but I haven't really thought about it so far. I do have a single Adire Extremis woofer, but I kind of have plans for it in a 1 cu.ft. mini ported enclosure, 100dB down to 30Hz. Fun woofers, too bad Adire no longer exist. Oh, I also do consider trades as optional. I just don't have many things in mind at the moment that I'm looking for though, just a few specific things. All I'm really looking for are upgraded front seats(most likely qstarin's), GT Spec fender cowl brace (GC8 chassis version), and maybe a subwoofer plate amp, maybe in the 500w range. I'm probably going to start tossing things on eBay come the weekend, so if you have interest or maybe know someone else who might, raise your hand.
Thought I'd add some info: The SpeedXL razor works really well. Consumer Search has a nice review of the top electric razors: http://www.consumersearch.com/electric-shavers The XL razors were the precursors to the Arcitect 1050X and both the Speed and Touch offer the full shave head which is very efficient at cutting all the hairs. The camcorder functions great. It's only "flaw" is the 8mm film. You just don't get high res out of it and it can be prone to distortion from shaking the camcorder as it's a film based system. The quality is good for internet usage and small videos. Here's a video I made a couple winters again with the camcorder that some of you have seen before:
i'd be interested in the rear sway bar, as well as the speakers as long as i could connect them to the oem deck.
What car? The 17mm sway will fit to most Impreza/WRX cars, I'm not sure about the new chassis. The speakers are not car audio speakers. They are raw drivers. They are not designed to simply hook up to a HU. You would need other hardware to make use of them. These are also midrange drivers, so they are smaller then a woofer and too big for tweeter duties. They are primarily intended as a mid driver between a larger woofer and small tweeter in a 3-way setup.
Someone please correct me if I'm wrong, but I believe the 17mm rear sway B.R.R. is selling is the same size as the stock rear sway on your 05 rs (and most Impreza's over a wide range of years).
It's a stock WRX bar. But I am uncertain what came on the base Imprezas. They do vary and some do come with the smaller bar. Frankly, whoever is interested in it should be looking to see what they have in the first place.
Now that I think about it more, I'm thinking the stock may actually be a 13mm? My memory is so bad these days. Just thought I'd mention it so you'd be sure to know if it was actually an upgrade. And free bumpz for the seller.
Nope, not sold. Until someone pays, nothing's sold. 17mm off a wrx bought from a local Rochester member some time back.
No clue what car it came from, a 97 something, big port SOHC. The exhaust is a single port design, one pipe per side.
Not the black one. I'm heading up to the Cities wed morning to drop off a friend at the airport (not sure which specifically). As well, something as small as a shift knob can be simply tossed in a bubblewrap envelope and sent USPS for just a couple dollars. Anything of the smaller items I have can be done so.
No specific pics of it. It's sitting in my bro's garage right now, about 90 miles from me at the moment. It's a metal rod covered in black paint. The conditions is normal. :laugh: I'm sure there's some paint missing, and I'm sure there's some rust. Tons? No, but like springs or any other painted steel item on a car, it's open to the elements and wears as such. It's been sitting in the garage for a few years sinced I grabbed a 20mm bar. I'm not sure what year car it came off of originally, maybe an 03-04 WRX I think. The good thing is that it's probably spent half its live not under a car. I have the bushings and mounting brackets for it that came with it when I bought it. I'll be at my bro's this upcoming weekend, so I can grab pics then.
bump. I updated the first post to represent what was left. I would kind of like to head up to the swap meet Saturday. My brother and I have a TON of spare parts lying around including a couple turbos, exhaust, stock intercooler, and just a pile of spare stock parts. He won't be back from his trip till later, so it would be quite a hassle trying to represent his parts and know what kind of pricing he wants.
