Anyone know of a local place that sells braided line by the foot and AN fittings? The nylon line for my oil pressure gauge is leaking in my dash
Ouch, that sucks. Hopefully somebody will chime in on where to get some. Perhaps 7 Corners Hardware in St. Paul? Your case is the #1 reason to get an electric oil pressure gauge with the sender unit under the hood.
MAS off university. there is also a pirtek about 2 blocks away from MAS on uni and vandalia that would probably have what you need as well (pirtek has other locations as well - they've been very very helpful to me in the past. great customer service - especially in helping me with things they don't normally deal with)
If it is closer, TNT is in Blaine. TNT Specialties 9221 Baltimore St NE Blaine, MN 55449-4340 (763) 785-9199
I called MAS today and they don't have -3. I can get it from anplumbing.com. I may try the copper route. I wanted to get an elctronic gauge, but the damn things are 3x as much, and at the time, getting this thing going was nuckel and diming me. For fuel pressure, I won't even think about a mechanical gauge in the cabin.
