Car Audio

Discussion in 'For Sale : Car Parts' started by Shancaldazar, Dec 12, 2018.

  1. Shancaldazar
    Offline

    Shancaldazar Well-Known Member

    Likes Received:
    220
    Trophy Points:
    228
    I have some car audio stuff (some used, some new that I've collected over time) for sale. Some items were installed and verified that they worked, but I shortly thereafter found out the car was junk and so removed many of the items.

    Kenwood Excelon DDX9904S Android Auto/Apple Car Play capacitive touch screen head unit. Installed and verified it worked, but less than 20 minutes of use on it. Comes with all accessories (GPS antennae, microphone, wiring harness, trim piece, trim piece removal tools, USB extension cables, plus a 48" antennae extension cable) (https://www.crutchfield.com/p_613DDX9904/Kenwood-Excelon-DDX9904S.html?search=DDX9904S&skipvs=T)- $360

    Polk Audio DB 6502 6.5" component speakers (6.5 woofer and 3/4" tweeters, tweeters currently are in a 2003 forester tweeter mounting unit so are direct drop in for a SG forester). Arguably one of the best 6.5" component speakers without paying way more money. Installed and used for a few minutes. Also comes with some nice wiring that I made for them and foam speaker baffles (pictured). (https://www.crutchfield.com/p_107DB6502/Polk-Audio-DB-6502.html) - $140

    Polk Audio DB 522 5-1/4" 2-in-1 speakers. Same as above, but for your rear passengers! (https://www.crutchfield.com/p_107DB522/Polk-Audio-DB-522.html?cc=02) - $40

    US acoustics Barbara Ann 4x100 watts RMS @ 4 ohms amplifier. A well respected amp strong enough to power the above Polk Speakers! A much beloved and highly recommended amp. (http://usacousticsca.com/barbara-ann-4-channel-amplifier.html). Installed and used for a few minutes but also comes with a $50 wiring kit with oxygen free 4 gauge wire - 16 feet power wire (+another 3 feet of spare wire), 3 feet ground wire, inline fuse, and RCA cables- $220

    Fi Car Audio SSD 12" Subwoofer (1250 Watts RMS) dual 2 ohm voice coils (can be wired in parallel to be 1 ohm) with a red lettered carbon fiber dust cap. This is machined in Las Vegas and a very high quality subwoofer. It comes with the $20 cooling option (lets the sub run cooler and last longer). Does not come with any of the upgraded voice coils or internal leads (those are meant for people who want to run as much power as they can through a sub to get it as loud as possible and sacrifice sound quality). (https://ficaraudio.com/product/ssd-series-ssd12/). Not even taken out of the box yet, so no pictures. It was $300 shipped to me, so $240

    US acoustics Mike 1500 watts RMS @ 1 ohm stable Class D amplifier. Comes with all accessories (mounting rubber pads, external power remote). Again, another very high quality amplifier that is very well respected for quality and longevity. (http://usacousticsca.com/mike-classD-amplifier.html). Comes with 20 feet red oxygen free copper 1/0 gauge USA Made wire and 10 feet of the same wire but in black. Also with two 300 amp fuses, several ring terminals for 1/0 gauge wire, and two 1/0 gauge to 4 gauge reducers for plugging the wire into this amp (The wire+fuses+terminals+reducers is $160 alone). None of this has been installed yet - $360

    Sound Ordinance B-8PTD 125 watt under seat powered subwoofer (new from warranty) with all accessories. Comes with a rockford-fosgate 10 gauge oxygen free copper wiring kit and RCA cables (16 feet power, 3 foot ground, inline fuse) (https://www.crutchfield.com/p_777B8PTD/Sound-Ordnance-B-8PTD.html) - $100

    Older JVC head unit with wiring harness (with wiring harness, this was the previous head unit in my Forester). Don't remember a lot of the specs on it, but it is fully functional double DIN with USB charing/input. Has been used for about 7-8 years in my forester. Color changing LEDS. Great for stock Subaru sound system or with an amp for other systems. Some scratches on the front. - $20

    Kenwood KAC-2404 40 RMS watts x 4 amplifier. Great for lower power aftermarket speakers. Used for about 7-8 years. No wiring kit included - $40

    Package Deals:


    Both sets of polk speakers + barbara ann amp/wiring kit - $350 ($500 from retailers and this only has a few minutes of use)

    Mike Amplifier with all 1/0 gauge wire/fuses/terminals/reducers + Fi 12" Sub - $500 (this is a $700 set up from retailers and is still brand new!).

    Both sets of Polk Speakers + Barbara Ann Amp/wiring + Fi SSD 12" Sub + Mike Amplifier/wiring + Kenwood DDX9904S - $1100 ($1600 from retailers)

    Sound Ordinance Power Subwoofer + JVC Head Unite + Kenwood Amp (just need 4 door speakers and you'll have a great entry sound system) - $130

     

    Attached Files:

    tangledupinblu likes this.
  2. Shancaldazar
    Offline

    Shancaldazar Well-Known Member

    Likes Received:
    220
    Trophy Points:
    228
    More photos (Kenwood head unit, polk speakers, wiring kit for Barbara Ann)
     

    Attached Files:

    tangledupinblu likes this.
  3. Shancaldazar
    Offline

    Shancaldazar Well-Known Member

    Likes Received:
    220
    Trophy Points:
    228
    JVC head unit, Kenwood Amp, Sound Ordinance Subwoofer
     

    Attached Files:

    tangledupinblu likes this.
  4. Shancaldazar
    Offline

    Shancaldazar Well-Known Member

    Likes Received:
    220
    Trophy Points:
    228
    Because I always manage to forget this...

    Location is Plymouth. Also can meet near North Memorial Robbinsdale or North Memorial Maple Grove depending on the day.