Pictures of these rims can be found here. http://www.sidewaysmotorsports.com/gallery/forsale?&page=3 Also the tires that are mounted are: Yokohama Parada Spec 2 215/35/18 84W If there is alot of interest here (and NASIOC) I may end up going the ebay route. Thanks, Dan Moore
I will post a similar change here as I did on NASIOC. Since I wouldnt have to ship anything if someone here in town picked these things up this price is lower. $350 takes all 4 rims and tires. Delivery avalible. Dan Moore
I know there are a few places around. The only one that comes to mind is Keystone. www.keystone-auto.com They have one in Mpls. Dan
Any takers ?? $350 delivered in the cities is a hell of a deal, even if you were to just go and buy 2 new ones to make a set. Dan
To All who plan to come and get/look at parts this weekend. Please call my cell phone to get directions and to make sure that I will be there at the time you wish. I dont plan on going anywhere but....everyone knows how that goes. 651-775-4366 my address is 15330 Okapi ST NW Ramsey, MN 55303 Thanks, Dan Moore
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Originally posted by Sideways Motorsports I will be around all weekend if someone wants to come and take a look at these. Dan <hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote"> Dan, why not bring out your parts to the swap meet today. There's an event going on here: http://www.mnsubaru.com/forums/topic.asp?TOPIC_ID=278
Since we were already posting elsewhere about these. Link to the pics is in here too. 300 pick them up. Add gas money and I can deliver if needed. Dan
whats the bolt pattern? i didnt look at the pics but if they are 4 lug and would fit "The Geo" i might be able to find a home for them.
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Originally posted by Dynapar whats the bolt pattern? i didnt look at the pics but if they are 4 lug and would fit "The Geo" i might be able to find a home for them. <hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote"> these rims are pretty much subaru exclusive, i.e., 5x100 bolt pattern and high offset... they are only made in high offsets, so they only fit Subarus correctly, suppose you could put them on another car, be crappy though...
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Originally posted by Dynapar whats the bolt pattern? i didnt look at the pics but if they are 4 lug and would fit "The Geo" i might be able to find a home for them. <hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote"> I dont think they will fit on a 4 lug car
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Originally posted by Speedemon <blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Originally posted by Dynapar whats the bolt pattern? i didnt look at the pics but if they are 4 lug and would fit "The Geo" i might be able to find a home for them. <hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote"> I dont think they will fit on a 4 lug car <hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote"> ahh, i think i already clarified that fact...
The $100 estimate was just for the bent one. Its been so long ago I cant recall if it was one of the internet companies that I was contacting or keystone here in town. Another thing to think about is this was just to repair it not to refinish them too. Although I know that keystone does that as well. A link to keystones site is near the top of this thread. Dan
OK I am getting confused between the board here and emails. I know longer know who is who. Can we please keep it in here until a sale is pending. Here is what I have so far. Interested parties are: Chris (kaliforniakid) and Yang/Yia ([email protected]) if I am missing something or someone please post it in here. Thanks, Dan
Thats a good question and I'm not sure. I know the bolt patter would be correct but you would have to make sure the the width would be ok. These are 8" wide. Might be able to post the question on here in the tech section and get a good answer. Dan
Sell it to some guy who wants the "drag" look for his car. You know, the spares on the front and rims on the rear.
i thought about posting on a honda/acura site, but trying to go from 5 to 4 lug or 100mm to 114mm would be tricky. dan
I would sell just the 2 good ones. Here is what I have been doing. On nasioc I have posted the same price I have on here for just the 2 good ones and not all 4. I am not going to drop the price much since its going to be very difficult to sell the other 2. To me it just makes more sense to get someone interested in haveing the other 2 repaired and then have a good complete set. If these dont sell soon I may end up having them repaired and then sell them for quite a bit more, or keep them for tarmac stuff or shows. Dan
OK tbone your counted in, but im not exactally sure what you are wanting to be counted in for. $300 buys all 4 and tires. $275 buys just the 2 with tires. No lug nuts will be coming with the set. These are pick up prices and I am not lowering them any further than this unless you have a full set of rims that I can store the car on. Any size would work from 15's to 17's to a full set of doughnut spares. We can discuss a price drop but keep in mind I am not looking for anything perfect just something to keep it off the ground. I will need a day or two's notice to get the rims off the car. ( i have to move the vechicle to solid ground if they are sold) Dan
