........ View attachment 13455 crappy looking haha... next lot of em will be made better with a jig too hopefully... video... [youtube]<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/JVBoZI1k3Nw&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/JVBoZI1k3Nw&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>[/youtube] hopefully some idea of the sound... FF towards the end where the camera angle changes...
Naw - picked up some fresh pins. Next time I got it up in the air I'll try pulling the ones out and twisting that axle 180 and seeing if it lines up the other way. I swear I tried that on the driver's side and it didn't help, but it's worth checking again. On the plus side, the pins are still both stuck in there half-way.
Here is some of the stuff tstrboy made for me. short vid of the headers and the catback http://video.google.com/videoplay?docid=-2135925623744872907&hl=en vid of the 3" tbe w/ stock headers http://video.google.com/videoplay?docid=-5283983314353087444&hl=en Pics: catback is 3" catless with a resonator and a ebay melon shooter muffler Headers are 1 7/8" (IIRC) maybe a touch smaller, using stock dual port collectors.
BOV is very loud. however exhaust is still loud enough to have gotten me pulled over twice. Once while I was coasting!:eek4:
well it is under the car.. and first attempt with nothing to copy from... there are about 9 of my exhausts floating around this club.... sure you will hear one eventually... I have a clip with a flowmaster if you wanna hear it.. it was tooooo loud can load it tomorrow
just giving you a hard time, bud Really, it looks awesome for self-done and that clip sounded GOOD! Honestly, tell me you'll do me a full setup - header & cat-less back and it's a deal. Whatever it takes to make it work.
