I am parting out a 2002 sedona red bugeye. As seen in this thread: http://www.mnsubaru.com/forums/showthread.php?t=34838 Better pics will be forthcoming pending weather tomorrow. car has 68k on it. I have started the car to hear the noise. It sounds hell, but the car idled for the ten seconds i let it run. given the build that will need to happen, I imagine you can find any other problems for yourself. It's a full on everything goes type of deal. As noted in the other thread and original craigslist add, there is some flywheel issue, maybe the original crank is shot. A second longblock came with the car second longblock has 36xxx according to the previous owner. I would prefer to sell large pieces together so I'll try that first. As winter comes closer I'll break down and separate larger pieces. Couple quick prices, everything else is best offer. Complete Engine/Dash swap: including complete motor and second complete longblock, crossmember, transmission, diff, shafts, axels everything under the hood, including a moshimoto aluminum radiator, BPM TBE, the complete new/used long block, wiring harness,ECU, EVERything Related to the and including the Dash, pedal assembly, etc etc etc without me piece together the new motor Palleted and delivered anywhere (or any machine shop) in MN/ND/and some of WI I'll throw in a Sti timing belt too. $4500 obo Without dash stuff but with wiring/ECU $3200 With Complete set of four Hub/brakes/etc +400 With complete subframe and struts +200 The fibergalss hood, very light and good fitment + huge scoop but with two holes drilled for hood pins. $150 blacked out Head lights, stock tailights, and other misc body parts are on a best offer setup. misc interior pieces including ****ing everything not listed in the swap is best offer. You all know how this goes. If you think i'm way off on some price or another let me know and link me some examples to prove it. otherwise make offers and I'll probably take them. I will be tearing the car apart completely by NOVEMBER 1st. All bolts/clips/etc will be bagged and labeled to the best of my ability. Not all pops make it, by I try. Help me get this out of my driveway before the snow falls. PS. I will make delivery to the cities area on a group basis. if enough stuff is paid for or spoken for by reputable people, I will come to firestone or some such. Free of charge. -colin
i need that black triangle at the front of the drivers window...do you have one of those? the screw mount broke in mine
I'll cut the damn quarters off if you want to go flared...:biggrin: From a different account? i didnt see one from you?
The car colin is parting out is located in Moorhead, MN. Colin, I will be going down for the MNSubaru Dyno Day @ RS motors. I am more then willing to deliver parts to people there(as long as they fit in my car, and the buyer can get them from me @ the dyno day)
i need a new frnt end passenger fender all the way to the other side of the fender do you stil have that?
If they were my fenders, I would want a better paint job,but they are in good shape. the bumper is decent, some scratches and one ding front and center. nothing serious. the worst thing is that both sides the slotted Pop hole is torn. \ moorhead mn This is awesome, thanx faber. I would definitely put my trust in this guy. as stated in the pm. I'm 90% sure you dont want this. IF you do, Ill gladly let you have whatever you want when I'm done pulling. Lastly: I'm trying to respond to PM's in a timely fashion. Sorry if it's taking too long. There has been a bunch of interest in the trunk. The line is 3 deep, and I'll keep track, but you should all pay attention to the pictures tomorrow. the trunk is not a OEM trunk I believe. It might have been repaired to reskinned. or is some fiberglass mix. I will post detailed pics and explaination tomorrow around noon. thanks for all the interest. -colin
Big picture dump. I don't have time for big update i am about to haul beets for 12 hours straight. Hopefuly tomorrow. trunk is oem. holes have been welded, and the trunk was sanded and painted. thats why i thought it looked funny. fitment seems good. the only wheel with damage. goodyear allseason, lots of tread. fenders are actually better than i thought. bumper and damage can be repaired easily. adam @ MAP has first dibs. motor pics extra longblock:
interior short shift and weighted knob hood with big scoop. I actually think this is a nice hood for fiberglass. strong and light. underside all four doors. driverside has one dent and scratches, passengers side is much better tails crappy front end fix if you want more specific pics LMK and then wait. I'll be super busy for the next 7-10 days, but If you are ready and paypal, I'll try to get things together for the dyno day.
lol. I should even be able to log in now. but it rained. so no more farming work for a few days. this means the car will get torn apart faster now. you still have dibs on the body parts you want. if you need them ASAP i will try to get them too you.
Also: PM's all replied to and it's 4:05 in the morning. they better stay replied to for at least 3 hours. yeesh.
Well when you get the thing torn apart and whatnot like the engine out doors interior wheels etc what do you want for the body/shell or what remains of it
^I would get ~$80 bucks at the scrap iron yard. If you want it you can have it for scrap minus an amount based on how i'm feeling that day. NEWS: Farming has stopped. I will try to tear a bunch apart and get down to the swap meet. IF you have interest in something I suggest you come see it there.
Ok so fender car hopefully a rear Axel so I can use a car caddy radidator that should be about it send me a price
To everyone interested in bigger parts: I am going to make the swap meet. I am bringing everything i could get off the damn car today. This includes the full motor, and the extra longblock. I plan on making a good cities trip: Meaning if you cant make the swap meet, call me 701-361-8783 cell and i will try and meet up with you.
Hey Colin. PM me if you still have turbo, intercooler, and accessories still for sale. Thanks. Colin.
Update: wheels are sold. So is the fuel pump regulator, most everything else is still available. I expect to have the car down to a fuel tank and unibody by the end of next week.
I have every part of a stock exhaust, or, I have a BPM turbo back with the divorced internal wastegate setup. Which one can I sell you?:biggrin:
Yes. I would. But I have tan ones for you if you want them....Oh wait, I have 4 sets of visors and oh **** handles in various colors. lol BUMP. BUY MY BIG stuff.
