I've got a list of parts that just came off my car, as I am changing over to a rotated setup. This previous setup was fantastic on the street/daily driver. Highly recommended setup. Blouch 18g xt turbo (pictured next to a GT3076r for reference) 8cm exhaust housing, IWG, Standard actuator, 2.4" inlet, comes with all oil/water lines. Virtually no shaft play, 5k miles, great condition - $1050 Add Blouch WRX specific stainless flex oil feed line- $40 ID1000 injectors 5k miles, excellent condition, great E85 injectors, come with plug and play clips as well as pin/harness adapters. -$415 Perrin 2.4" silicone turbo inlet This is the wire reinforced version, excellent fittment, comes with all fittings, clamps, adapters. 5k miles, excellent condition. -$175 Invidia divorced bellmouth downpipe Has an extra o2 sensor bung for a wideband. Heatwrapped with DEI wrap and locking stainless ties Excellent condition, no scratches, dents or bends of any kind. -$235 Stock 06 WRX Up pipe Good condition, 60k miles, comes with brackets -$55 Stock 06 WRX intake box, good panel filter, and after MAF pipe All clamps included. 60k miles, excellent condition. Does not come with MAF sensor -$60 Also pictured above, stock heat shield modified to fit aftermarket downpipes. Inside is coated with DEI reflect a cool tape to aide in heat shielding. Bracket/hardware included as well. -$25 Please PM with questions or offers. Thanks for looking!
Hmmm the injectors are top feeds right? These were the exact injectors I was looking at purchasing. I owe like $16k in taxes but I fixed my furnace this morning myself so I'll justify buying them that way
Yes top feed injectors. Excellent review from me as well, idled like stock, and seemed to be very easy to tune. Great injectors
Injectors sold, heat shield/bracket sold as well but I have another shield only, no bracket. Second shield pending. Thanks!
His name is morocco88 on nasioc. It's really great stuff, he built the up down and intake for me, I am very impressed so far
