The kit is a TCE Kit for the wrx, their +2 kit. http://www.tceperformanceproducts.com/ Plus 2: The TCE/Wilwood LBK Wilwood DnyaPro four piston calipers w/stainless steel pistons Wilwood radial mount brackets TCE spec 12" x 1.00" Heavy Duty Rotors Gas slotted finish Wilwood forged aluminum rotor hats, TCE modified Yes they are 2-piece rotors...BALLER BP20 pads TCE spec stainless steel hose kit Best part, they fit under STOCK wrx wheels!!! (as I am told by Todd at TCE) Please verify again though if you are concerned. This is what will come with the kit. The kit is used, I just purchased it on short sale on EBAY for $450 and I have not installed them yet. I was thinking about putting them on but I MIGHT go a different direction now before I install them. The kit as it sits now IS able to be installed, enough pad life and rotor life yet. It even comes with the mounting brackets and SS Braided lines. I honestly will sell them for what I bought it for if somebody wants them, i think i would just rather have the cash so i can finish other projects. I would recommend looking into pads and rotors at some point though as they are not BRAND NEW. Plenty of life to throw them on right now though! $460 FIRM if you come pick them up, really don't want to ship. I talked to Todd at TCE and these guys KNOW HOW TO BUILD A KIT, its perfectly paired bias wise with the rear wrx brakes. Also you can get the replacement parts when that time comes for FAR LESS than a whole kit new. Its all ready to go!!! For pickup in Minneapolis, pics tomorrow! Its literally everything you need to bolt right on! There is no warranty with me just FYI, I am just looking to turn these around to someone that will take advantage of them. BTW I was personally told by Todd at TCE that these ARE all weather brakes, just keep em clean!! TXT me for questions or when you want to swing by 952 913 47 EIGHT FIVE
Might you post some pictures of the rotors and pads? Any idea of the run-out on the rotors? The caliper bodies are aluminum correct? Also any idea on how easily/how much it would be to source new rotors/pads in the future? Any vendor options beyond TCE?
Yeah I can get some more pics, VERY easy to source the parts through TCE, they are actually cheap, cheaper than even hawk pads and the rotors are decently cheap too because you keep the hats! Yes all aluminum! I actually called Todd at TCE and he is getting a whole set ready (pads and rotors) if anybody needs them! Will
Assuming you have 5x100 I would think yes, try calling them maybe he can answer you direct! 480-967-7901
Thanks for the number. it looks like this setup is very similar to the subaru 4 pot brakes. Rotors are a little smaller than my stock ones:-/.
Yeah they will probably make the pedal feel much stiffer and nicer. For my car best option would be brembos. These are perfect for like 03-05 wrx.
morning bump, if someone picks them up today from grimmspeed ill entertain lower offer? $430 FIRM but i wont go any lower, basically i eat the shipping and a bit more
Is anybody interested at a cool $400 on the table, so I don't have to take the time to package them up and ship them?
