Injector Dynamics Injectors These High Impedance injectors fit right into the 02-09 WRX and 07-08 STi with no modification needed. But the fun does not stop there. They include all o-rings needed and the 1000cc injectors have an option for a set of Plug and Play (PnP) adapters making install a snap. No need to cut or modify your existing wire harness. The 2200's require no adapter as they are plug and play. Another great advantage to these is the fact that they are high impedance. This means "No More Resistor Box" and no chance too burn one up. This has been a hurdle to the hunt for a large injector that has great idle qualities while having the flow capacity to make big power. So take your fuel injector system to a new level with these injectors. ----------------------------------------------------------------------------------------------- Here's what you get with the 1000cc Injectors: (4) ID1000 Injectors including O-Rings (4) Injector Clips and pins (requires Delphi crimper) or (4) Injector Clips with Pig Tails (requires splicing into harness) or (4) Plug n Play Adapters (requires use of fingers) ----------------------------------------------------------------------------------------------- Here's what you get with the 2200cc Injectors: (4) ID2000 Injectors including O-Rings (4) Injector Clips and pins (requires Delphi crimper) or (4) Injector Clips with Pig Tails (requires splicing into harness) See more here: www.adrenalinrushllc.com/store or PM for your MNSubaru price!
Injector Dynamics Side Feed Conversion We also have the 1000cc and 2200cc Side Feed Conversion Kits for the STi's. This allows you to keep your side feed TGV but use top feed injectors. They include the injectors, fuel rails, hardware, O rings, everything. We also have the fitting that take the fuel rails to a -AN to integrate into your system. Please note that these WILL NOT work with the APS TGV's as the injector boss angle is different than a Subaru TGV and causes contact with the AVCS Solenoid on the heads. See more here: http://www.adrenalinrushllc.com/store/index.php?_a=viewProd&productId=11 then PM for your MNSubaru price! Here is a few pics:
Thanks for the orders. These are hot, if you don't have them, you need them. Say good by to fuel problems and resistor boxes.
More orders out the door today and more happy customers. You could be next, give your fuel system the most cost effective mod around. These will seriously be the last injectors you will buy for your Subaru.
I've only got one complaint lol, the rails say Maxwell Power on it =P But other than that, everything is great. Thanks AJ
That is because those rail were on a 4-6 week backorder and my friends at Maxwell were took care of us! The rail is the injector dynamics rail, maxwell just had their logo added.
