need help with injectors

Discussion in 'Modifications And Maintenance' started by kongao, Oct 13, 2005.

  1. kongao
    Offline

    kongao New Member

    Likes Received:
    0
    Trophy Points:
    0
    hey i have a slight problem and need advice. so i was changing my injectors on my car, 04 wrx. i got everything set and done but the fuel rail on the driver side is not seating all the way down on the front injector. it seats all the way down on the rest of them, but here is the weird thing the fuel rail is tighten and torqued down already. so what should i do? or what could the problem be? i am stumped on this :?

    any ideas anyone, anything will help, would like to get this done asap

    thanks
     
    kongao, Oct 13, 2005
    #1
  2. readymix
    Offline

    readymix ...Lest ye be trod upon... Staff Member

    Likes Received:
    2,892
    Trophy Points:
    473
    check your o-rings. Make sure they are where they are supposed to be.
     
    readymix, Oct 13, 2005
    #2
  3. AWDimprezaL
    Offline

    AWDimprezaL has more posts than you

    Likes Received:
    1,818
    Trophy Points:
    573
    dont be afraid to use some lube on the to get them to seat
     
    AWDimprezaL, Oct 13, 2005
    #3
  4. kongao
    Offline

    kongao New Member

    Likes Received:
    0
    Trophy Points:
    0
    yeah i will take it off and check everthing again to see what the problem is
     
    kongao, Oct 14, 2005
    #4