http://usmb.net/gallery/album302 Austin posted the still images he took. Some good shots of MN Subarus! Look at that perdy white WRX offroad!
Hey, who drives the white Impreza? Are the outer edges of the headlights blacked out? I'm thinking of doing that to my car and I'd like to know how.
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Originally posted by LVT uh i didnt take the pics, morgamn did. everyone else is in their cars. <hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote"> Austin took the pics (the guy that came out from Washington) That dark red Legacy there was just someone else who happend to be at the resteraunt when we pulled up LOL
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"> That dark red Legacy there was just someone else who happend to be at the resteraunt when we pulled up LOL <hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote"> well atleast you guys got more sube's in the pic right?
im the one who drove the white impreza.....yep they're black out. simple..... 1. take off head lights 2. preheat oven too 200-250ish 3. take of the clips, there should be about 2 on top and 2 on bottom and the tube. 4. clean the lights. 5. pop them into the oven. 6. let them cook for about 15 to 20 minutes. 7. take them out with oven glove. 8. open with a flat head screw driver enough to put your fingers in them. 9. once you get them open (make sure the sealent does not go inside of the light) the piece ur going to spray black need to be pop out... i think its the left side; you need a flat head screw driver, try to get it into the gap, then try to pop it out. once you get it out then ur set to spray the living life out of it.... 10. once done spraying it pop it back on. (wait tell it drys) 11. put the glass back on or leave them open and put both into the oven so the sealent gets sticky agian. 12. heat for about 5-10 minutes. 13. take out and press the glass onto the backing of the light. 14. once it fits nicely leave it to cool down.... AND THERE YOU HAVE IT BLACK EYE HEAD LIGHTS IF YOU DONT GET THE INSTRUCTIONS PM ME OR CALL FUJI AND HE OR I CAN DO IT FOR YOU....