nopee=6]I have a keg now too. w00t. $3.00 for a cup. No bitching either, that is the cheapest drunk you will get all weekend. I have 8 gallons of beer. I don't see a problem finishing it. If we need more, then I can easily get more. But it will cost 3 bucks for a cup. For those of you un-schooled in the keg drinking lifestyle, that is: $3.00 = all you can drink till it goes dry. No excuses either, no 3 bucks, no beer. I wont be paying to get all of you drunk this weekend.[/size] Call me if you need directions, need to know what to bring, need to know about times or whatever. It starts Friday after 5pm. NO SOONER UNLESS YOU CALL ME AND I TELL YOU IT IS SOONER. I am going to be in Mankato all morning so I don't know when I will be home exactly, but I do know it will be by 5pm. The only way it will be earlier is if you call me and ask and I tell you otherwise When: Starts September 2nd at 6pm Ends September 4th at 9pm or when the car is dead. Where: Readymix's Chop Shop. Located Here! Who: Anyone that wants free burgers and hot dogs and has a pair of functioning hands and wants to help dismantle a whole car. Also, people that have pre-ordered parts from this car... People Attending: 1 ) Readymix 2 ) 2.5~rs 3 ) Dream 4 ) AWDImprezaL 5 ) shay 6 ) jNorthWRX 7 ) Speedemon 8 ) kickin81 9 ) Dynapar *tool kit. sockets, wrenches, allens, pliers, hammer(s), breaker bar. sawzall 10 ) Justin 11 ) Cole 12 ) LVT 13 ) theGC8 14 ) wrxboy2003 15 ) tbone 16 ) joegengsta 17 ) tim12111234151451431341234123412341uno334number9 18 ) subaru4 19 ) Trenar 20 ) bikerboy (sunday for block disassembly) *=t3h maybe For those of you who have purchased parts, you will need to have your money with you. Contact me via AIM or email and leave a message with the list of parts you purchased. AWDImprezaL, I have your list. Here is a list of parts that might interest some of you... EJ22T heads complete Stock stereo Window Glass Brakes Headlight assemblies So far this is the list of parts that are accounted for. Injectors Turbo MAF UP Pipe Down Pipe ECU Wiring Harness Headers Crossmember Dash Lighting Brackets/Endlinks Lateral Control Arms. If you are interested in helping out/hanging out or you see something listed or unlisted that you want drop a reply in here with your name and what you can bring. The more tools the better, btw. I have some tools, but I KNOW FOR FACT I don't have enough to dismantle a car. Bring anything you think can help. I will supply food....burgers and hotdogs and probably some sodas and water. You are welcome to bring anything you want. There is plenty of space for people to sleep on the floor here and there WILL be beer available. So if you need a place to crash, you can stay here. No problems. This will definately be a good time, and I think it will be alot of fun to pull out and touch every single part on a Subaru car just for the learning experience. Again, if interested, drop your name on here. -Jason aka Readymix
Ill be there, i dont have many tools but i have the basics, is there anything in particular that u can think of? also i can bring some beverages if needed
we can always tear your wrx apart for the hell of it and get dibs on parts if we run out of things to tear off the leggy right?
LOL, not yet. Gotta wait till the EJ235T is finished being built...then when its time to put the new motor in, we can start tearing my engine bay up.
i just scored a ej22T short block, and heads for 50 bones! with 100K miles...WOOT!!! so i'll pretty much have everything i need after this little get-together
I would like to call dips on brackets, endlinks and lower lateral control arms for the rear swaybar Please...If still avaliable...Thanks Mohammad TheGC8
You know i will be there! i dont know from what time to what time, due to work but i will bring my tools and hands and good looks to help! TIM
Damn i was hoping i'd be around for that hope ya'll have fun. Make sure to take pics and post em i wanna see this dirty job haha.
I might be around for the first day, maybe I'll drop by! I just stripped my '85 gl...so I'm good at that! *edit* WOA, you live on the otherside of the planet!!!! maybe I won't be making it out for this one
Wow, the list got long. If you guys could, post what days you intend to show up, and what you can bring in the way of food/beer/soda/tools.
i will most likely be coming on the 3rd (sat.) i will have my tool kit. sockets, wrenches, allens, pliers, hammer(s), and i will grab my breaker bar. sawzall availbe if you need it too. as for food i will try to remember to pick up some mtn. dew or DP
hmm....Im not sure about me anymore, this weekend i might go to Green Bay....if i dont go i'll be there sat!
Man every one is gonna be there and i'm stuck out here in NY. :cry: Hey atleast i'm going to a rally cross on the 10th and going drag racing tonight. :?
Hey Readymix, I am actually not going to be able to make it. Wife's mom just had surgery so we are heading to Iowa this weekend. Anyways, have fun guys, I wish I could come :?
hmmm what time yous starting in on friday? it may work out better for me if i come on friday morning-early afternoon.
