hi any help. i;m looking for a shop that rebuilt wrx tranny or any website that sells performance synchros
yea i have a good race last night but i blow my third gear. i can go to third gear but third gear won't grab. so now i'm running 1,2,4,5th gear only
I'm not hugely familiar with the design of th subaru 5 speed, but I would suspect that the only whay that 3rd isn't grabbing is if you have sheared all of the teeth off of that gear, and that would mean that you have a bunch of metal pieces floating around in your transmission. If I were in this situation I would probably stop driving the car to prevent further damage.
Good race eh? I don't think the end result is too good but that is me. I think the David Wray Auto does that kind of work. I would drain your fluid and see what comes out. Got any magnets? http://mnsubaru.com/forums/showthre...liated-Vendors?p=705840&viewfull=1#post705840
yea i drain out the tranny fluid and there is some metal coming out. so i was thinking about buying a new tranny or rebuilt mine.
what do you mean 3rd gear won't grab? does the shifter keep popping back out of 3rd or can does it stay in 3rd but nothing happens?
/thread nightcrawlers, you can try mfactory or ppg gears if you want something beefier than stock. Are you running the 18g that the previous owner put on the car? Or something bigger?
Well since I feel I have quite a bit of experience with blowing up transmissions I have to ask if it is making a lot of noise? Every time I blew one up I could TELL. LoL
http://www.rallispec.com/prod_trans.htm - they sell RA and ppg gearsets. modena, albins, kaps, hewland all sell upgraded gearsets as well