Specific pics available upon request, but post #2 contains pics. Please pm me if you are interested in purchasing any of these items. All items are brand new in box unless otherwise noted. They were opened for inspection and pictures only. 1) Block Halves EJ257 with Subaru OEM Gasket Kit $800 (retails over $1200) 2) Cusco Hyper-Disk Clutch (single) $650 (retails over $1000) 3) Hydra Nemesis II for WRX $1200 (retails $1500+) 4) Hydramist full kit $600 (retails over $750) 5) GT40R Ultimate Racing Single Scroll .72 hot side for fast spool FULL KIT including tial wastegate, tial bov, Ultimate racing Front mount intercooler, etc Similar to this kit: http://www.ultimate-racing.com/Products2/WRX-STi_02-07/WRX-STi_02-07_GT40R_TurboKit.shtml except with custom A/R includes something similar to this fmic kit: http://www.ultimate-racing.com/Products2/WRX-STi_02-07/WRX-STi_02-07_FMIC-Kit.shtml except no overflow tank but includes tial bov $6000 6) Ultimate 1000cc injectors (WRX - top feed) $300 (retail $450) 7) FULLY Built WRX Heads *Built By Andrewtech PPG* $2000 (Cost me $2500+) with new internals (springs, valves, retainers, camshaft 262, ported polished intake, cleaned and measured. *Internals are Crower racing* The Cams alone are $750. 8) JE Piston (stock bore 99mm) This is not the standard one, the side and crowns are double coated to handle high boost and Nitrous $550 (retail $750) 9) Nitrous Kit $350 still in box (NOS dry kit) 10) 04-05 Seibon Hood RS style with FULL ventureshield invisible bra (not just the leading edge. The entire hood is covered) $600 (retail $650 + $500 film) 11) Extreme Dimension Reverse hood scoop. Used, has small chip shown below $300 (retail $550+) 12) Defi gauges (wrx green, 6 gauges and defi link) - 3 are brand new in box: 52 mm water temp 52mm fuel pressure 52mm oil temp 3 are mounted (but never wired in) in a custom fiberglass clock pod that includes a Heads Up display: 52mm boost 60mm tach 52mm oil pressure sold 1200 for all. Willing to separate too 13) crower rods 600 14) oem ej257 crankshaft 275 15) Driveshaft shop aluminum driveshaft 400 16) driveshaft shop 500hp rear axles (RA8524 l5) http://www.driveshaftshop.com/pdetail.php?pid=575 1000 17) PPG front LSD http://www.ppgearbox.com.au/page.asp?parentid=3&parent2id=14&parent3id=31&productid=67 1200 18) Kartboy/TiC 5mt shift bushings (front, rear, and pivot) 60 19) compustar p2w900fm-a 220 21) ppg 5mt shift forks 450 Yes, these are from the build you are thinking about. Yes, it really sucks that the build wont be finished. Please keep posts on topic (questions about parts you are interested in buying, vouching for the seller , notifying me that you've pm'd me, etc...). thanks for looking!
