I'm looking for both the male and female sides of an automotive grade electrical connector. It needs to be 8 pins, but can be more. It needs to have at least 2" of wire coming from each side to allow a splice into existing wire, more length is preferable. It doesn't matter what it came from, just that it has 8 pins and 8 wires (or more). I figure someone on here has to have some old wiring harnesses laying around that can be cannibalized. I.E. Something like this, only 8 or more pins/wires.
I've got a couple boxes full of old wiring stuff, and another harness just arrived on friday that I have to get started on.....I'll see if I can scare anything up
I did, in fact, find one. from an XT6 trip computer. 9 pins (3 square) with about 8" of wire on either side. pm me your addy and I'll send it to ya tomorrow.
