WTB ASAP: Turbo Exhaust Manifold

Hey guys!

I am in need of a passenger side turbo exhaust manifold. I just need the one passenger side manifold, but if you have a complete exhaust manifold you don't want to split apart, I would entertain that as well.

Looking for something ASAP. Send me a PM, email ([email protected]), or shoot me a text (651-623-3348)

Thanks!

-Matt

 

Clarification: No Outback XT or FXT manifolds. I believe those are slightly different than the WRX/Legacy Sport (which I have, which has no O2 sensor port..)

 

Im puzzled? you looking for a exhaust manifold but one without the o2 sensor port. I believe all turbo models have o2 sensor ports. both my 04 sti and 03 wrx had sensors on the passenger manifold. can you tell us what year and model you have.

 

1 gen legacy didn't have the o2 hole, (as did some of the jdm exhaust manifolds)

 

After rereading, I believe he's looking for the pass side 3 port,
02-05

 

Yeah, my current manifold is off a 91 Legacy Sport.

The exhaust manifold and up-pipe (cat-less) with the heads and decided to run it by placing the front 02 sensor after the downpipe cat.

 

I'm confused, why do you need a new manifold?

 

My current manifold is from and OBD1 car that only possessed one o2 sensor. My current engine is OBD2 and has 2 O2's.

I would like to get rid of my check engine light by having a front and rear o2 sensor, instead of just a front O2 sensor installed in the rear O2 spot.

 

Do you have some sort of ECU tuning solution, either Open Source or Cobb? They can disable the CEL due to the rear sensor. It doesn't do anything useful fuel-related anyway on the 02-05 ECU other than being annoying nag for emissions (supposed to detect cat failure), it's disabled by default in the Cobb Stg 2 OTS map for instance...

 

Its 1995 legacy L with a 1996 EJ22E. I have a piggyback ECU (Perfect Power 6) But sadly it can only tune the closed loop and adjust timing, no CEL disable features..

 

Might be easier to pull the downpipe and have a muffler shop weld in a bung before the cat to put the front o2 in?

 

Possibly.. I have a line on a manifold from mnsnowdrifter. I don't mine disassembling some exhaust manifolds to install cheap OEM parts

 

Found one! @MNSnoDrifter hooked me up.