WTS a few engine bits Hey guys whats up? I am going to a bigger turbo and need to get rid of this one. Here is the link to the exact turbo that I am selling, remember its the 18G: http://www.boostplanet.com/product5.htm http://mnsubaru.com/forums/attachment.php?attachmentid=2431&stc=1&d=1168637678 http://mnsubaru.com/forums/attachment.php?attachmentid=2432&stc=1&d=1168637678 It was installed by Bikerboy and I have had no issues. It was tuned by RiftsWRX, Jeorge for P&L Motorsports in Chicago. I have the stock boost solenoid currently in my car and because of that I only boosted to 19psi. The turbo has had both a 93 map and race map ran through it. The total mileage on the turbo is 8,000 miles with about 3,500 miles being highway miles being traveled between Minneapolis and Chicago. I have had no issues with it and turbo has worked perfect. It is currently being taken off by PHATsuby in rochester. It can either be picked up or sent to you. The only thing I want to mention is that DeadBolt offers rebuilds for life if you purchase it from them. I have read that I can send it to them, get it rebuilt and cleaned, and you can then purchase it from them. This then allows you to have rebuilds for life and a warrantied turbo. I can have pictures of the turbo put up as soon as its off my car this week. Please PM me all offers. I am always looking for trades. I would love something involving brakes but I will consider any offers. APS 3" TBE with Twin Tip http://www.airpowersystems.com.au/us_spec/subaru/exhausts/apswrx-hoe-r8/apswrx-hoe-r8.htm I have the above exhaust coming off of my car. I have had it on for 25XXX miles. The mid pipe is dented and scratched as I have caught a couple of curbs. I will have pictures of the damage put up in the next couple of days. This doesn't effect it at all since there are no punctures. If you dont like that you can get a new midpipe made quite easily at any exhaust shop. I am sure our meineke can help you out. I should also mention that there is no cat in this exhaust...I have the race version. Because of that the tone of the exhaust noticeable when putzing around and very noticeable when you go WOT. The exhaust definately has wear and tear which is evident but there are no holes anywhere in the exhaust. I would like 600 for the entire TBE Catless Helix Flex Up pipe It is just another flex up pipe. Worked great for me and had no leaks. does have a spot for 02 sensor. Will have pictures up with in a couple of days. Looking for 150 MRT TMIC: http://mnsubaru.com/forums/attachment.php?attachmentid=2430&stc=1&d=1168637678 http://mnsubaru.com/forums/attachment.php?attachmentid=2429&stc=1&d=1168637678 The following is the descripttion from the MRT website: TOP MOUNT intercooler. Fits original factory mounts including LHD and RHD models. Bar & plate design core for more efficient cooling - 485mm x 185mm x 115mm thick. CNC fabricated alloy end tanks. Dual entry type. Factopry style Blow off valve mount for attaching factory unit or aftermarket. Looks great and is extremely well made. (Not cast tanks!) Also includes high flow high pressure silicon inlet kit, to connect from turbo to intercooler. This replaces the factory plastic (WRX) kit that can split under high boost or high temps. Easy fitting. approx 30 mins. NOTE top Bonnet / hood rubber seal needs to be trimmed or removed to allow added thickness. Best used with replacement top STi replica (larger) hood / bonnet scoop (refer part #suwb246a) For complete details and dimensions on all MRT TOP MOUNT intercoolers refer on line brochures page on MRT web site. (Perforamnce Page 5) Code: suwe126hha Once again I will have pictures up within two days, as soon as I get them. I have had it on for roughly 8XXX miles and it had 3XXX miles before that. I would like 350 OBO Perrin Inlet: I dont know why I didn't post this earlier but I also have a perrin inlet coming off of the car. It is red in color. I have had no leaks or problems with the inlet. You can find it at www.perrinperformance.com under the wrx/sti section. I can get my own pics of it if you want but we all know what an inlet pipe looks like. Stock TD04 49XXX miles with hard driving here and there. No shaft play at all just has some miles on it. sorry but I have no pictures at the moment since its sitting in my garage but I figured I would throw it up anyways. I am always looking for trades and I will take any offers Please PM me Thanks for looking, J
*bump* and sorry for the delay on pics...PHATsuby forgot his camera in the cities but should have it any day now. Very sorry for the delay but besides the exhaust everything will show regular wear and tear.
Alright...everything is sold except the exhaust and stock td04. Any offers? I will now take 500 or any reasonable offer if they are willing to pick it up or meet somewhere.
