25D DOHC Valve Lash

Anyone have the valve lash spec of a 97 phase 1 DOHC - shimmed buckets? My book only covers to 96 w/ HLA's.

 

Valve lash adjuster. ('97 2.5 DOHC)

OD: 29.959 - 29.975 mm

 

How about lash between shim and cam w/ loeb (heh) 180* from face

 

Valve Lifter?
OD: 32.959 - 32.975 mm

 

*Face-Palm* haha so close, clearance between bucket and cam with valve fully uncompressed - Valve lash. Should be in the .00XX" range

 

G2M0767
3) Measure inner diameter of bush on cylinder head.
Inner diameter:
29.994 — 30.016 mm (1.1809 — 1.1817 in)
CAUTION:
If difference between outer diameter of valve lash
adjuster and inner diameter of bush is over the limit,
replace cylinder head.
Standard:
0.019 — 0.057 mm (0.0007 — 0.0022 in)
Limit:
0.100 mm (0.0039 in)

or

G2M0767
3) Measure inner diameter of valve lifter mating part on
cylinder head.
Inner diameter:
32.994 — 33.016 mm (1.2990 — 1.2998 in)
CAUTION:
If difference between outer diameter of valve lifter and
inner diameter of valve lifter mating part is over the
limit, replace cylinder head.
Standard:
0.019 — 0.057 mm (0.0007 — 0.0022 in)
Limit:
0.100 mm (0.0039 in)
?

 

Does this help?
.008" +/- .001" intake
.010" +/- .001" exhaust

 

Perfect thank you both!!

 

Beautiful, all of them are <.0005" above spec within tolerance.