transmission problem

Discussion in 'Modifications And Maintenance' started by Little GS, Jan 18, 2010.

  1. Little GS
    Offline

    Little GS Member

    Messages:
    73
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Oakdale
    so i was driving today and while pulling off to the side of the road (slowly) towards my driveway and i dropped my passenger side into the steep ditch. my car was bottomed out on an ice ridge just off the shoulder so i tried jockeying it back and forth(only in 1st and reverse), didnt work. After three times back and forth it felt like the wheels werent moving so i had my buddy tow me out. when we got the car out sure enough i could put it into any gear without the clutch in (with the car on) and it didnt engage. Im thinking its the clutch but what do you guys think?

    BTW its a 96 impreza L with a 5 speed manual
     
  2. errorcode3
    Offline

    errorcode3 Member

    Messages:
    518
    Likes Received:
    0
    Trophy Points:
    26
    Location:
    Hutchinson, MN
    did it smell? usually a clutch problem is accompanied by a pretty nasty smell, and smoke.
     
  3. JasonoJordan
    Offline

    JasonoJordan Well-Known Member

    Messages:
    6,032
    Likes Received:
    1,726
    Trophy Points:
    398
    Gender:
    Male
    Location:
    Grand Rapids, Minnesota, United States
    meybe it popped the thowout bearing out. when u push the clutch in does it drop straight to the floor?
     
  4. Little GS
    Offline

    Little GS Member

    Messages:
    73
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Oakdale
    no smoke but it did smell a little

    no it feels like normal just doesnt engage where it usually does, it doesnt engage at all
     
  5. errorcode3
    Offline

    errorcode3 Member

    Messages:
    518
    Likes Received:
    0
    Trophy Points:
    26
    Location:
    Hutchinson, MN
    so you can put the car in gear with in running WITHOUT pushing in the clutch?
    or it operates like usual (push clutch in, select gear, release clutch) but just doesn't engage after that.
     
  6. thunderdan1313
    Offline

    thunderdan1313 New Member

    Messages:
    689
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    minnetonka
    sound like what happend to me when i got my car. the clutch blew up into like 50 some peices.
    i do belive there is a a spot on the bottom of the trans were u can remove( like a small plate) and look at the clutch. if u see pieces of clutch matteral u will have ur answer.
     
  7. errorcode3
    Offline

    errorcode3 Member

    Messages:
    518
    Likes Received:
    0
    Trophy Points:
    26
    Location:
    Hutchinson, MN
    yeah there is a little black plate, not very thick and under a foot long held on by a couple bolts on the bottom of the motor/trans
     
  8. Dynapar
    Offline

    Dynapar Well-Known Member

    Messages:
    10,814
    Likes Received:
    31
    Trophy Points:
    358
    Location:
    Orono, MN
    You can also check the clutch cable and clutch fork for a positive return. If the fork got stuck or the pivot ball part broke it could something similar to this.
     
  9. Little GS
    Offline

    Little GS Member

    Messages:
    73
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Oakdale
    with the car running, and without pushing the clutch in, i can change gears.

    and thanks ill check that plate.
     
  10. Little GS
    Offline

    Little GS Member

    Messages:
    73
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Oakdale
    okay so after letting it sit for a day: while running and not pushing the clutch it WILL shift into reverse but none of the forward gears. now idk what to think.
     
  11. AWDmadness
    Offline

    AWDmadness Active Member

    Messages:
    68
    Likes Received:
    0
    Trophy Points:
    91
    Sounds like it needs a clutch to me....send me a pm, i also live in roch. I could maybe take a look at it for you some time.