Budget $ bling light install.

Discussion in 'Photo & Video Gallery' started by Lazieboy, Sep 24, 2017.

  1. Lazieboy

    Lazieboy Member

    Likes Received:
    Trophy Points:
    Some mods and parts needed.
    Had to extend the wire harness. Not long (wide) enough. Get some heat shrink tubing,ele tape.
    Pvc splice from Hardware store cut in half. Think 3 1/2 or 4 inch diameter. Push into opening with installed light included and screw in pvc case into light opening from inside /under bumper.
    Self tapping screws. Changed blue lights to yellow so I don't get pulled over.
    Cut factory fog cover blanks so I just have round bezels. Dremel tool is useful for this and for the in dash switch blank cut out. Ya mine is cockeyed. Here's the pics hope it helps someone else. $90 parts and supplies. Not including beer and other supplies.

    A.K.A. Upsidedown lazy guy.

    Attached Files: