Cannot put fuel in tank

Discussion in 'Modifications And Maintenance' started by silver03, Jul 21, 2010.

  1. silver03
    Offline

    silver03 Well-Known Member

    Likes Received:
    1,337
    Trophy Points:
    348
    ...05 LGT. Its the strangest thing. Went to put gas in at station and it will not fill. Pushed long copper wire down and there does not seem to be any obstacles. Went home, tried a slow pour with gas in a container, no go. Is there a vent hose issue somewhere? Where to begin? Thanks
     
  2. turbo_turtle
    Offline

    turbo_turtle Well-Known Member

    Likes Received:
    0
    Trophy Points:
    101
    Try putting the long copper wire down the much smaller hole located just underneath the filler hole. If that little hole gets clogged, then filling up is a very slow process. It's a breather tube to let air out as fuel goes in.

    ~Dan
     
  3. bora28
    Offline

    bora28 New Member

    Likes Received:
    0
    Trophy Points:
    0
    ^what he said^
    problems like this are usually in the neck assembly, start there
     
  4. TheSnowman
    Offline

    TheSnowman Well-Known Member

    Likes Received:
    12
    Trophy Points:
    123
    dont mean to tread jack but if thats a breather hole, is it bad to get fuel down it?
     
  5. turbo_turtle
    Offline

    turbo_turtle Well-Known Member

    Likes Received:
    0
    Trophy Points:
    101
    No, not at all. Anything you put threw there goes right into the fuel tank. The breather hole runs parallel to the filler neck and they connect closer to the tank.

    ~Dan
     
  6. silver03
    Offline

    silver03 Well-Known Member

    Likes Received:
    1,337
    Trophy Points:
    348
    Dan, we may have a winner here. Took a stout copper wire, pushed it in a ways...and gas from the container goes in with zero issues. We'll try the pump tomorrow. Thanks again