Hey all! I finally installed my Tap Turn from Diode a few weekends ago. All was great, and LOVED it. Today, while washing the car (right before the rain of course), I had the car in the on position for music while cleaning. I don’t remember bumping the turn signal (which is how you can dust settings..) but now, I have ZERO blinkers. Turn signals and hazards are both non responsive. Any suggestions or next steps on trouble shooting? vehicle: 2014 Forester XT Thanks for any guidance! J
Update: @pleiades that was the first place I started. double checked the fuses, and then pulled the relay again, and luckily had the OEM one still, so tested that, and it worked as expected. Contacted Diode Dynamics, and they sent out a replacement that arrived two days later. Everything has been working as expected since!