fenders rolled n pulled!

who cares its a car just roll them and watch the fenders. If they start to bow just back off.

 

bump!

Couldn't search mnsc since I'm not a member..

Is there Anyone out there that can find me a thread giving more details on shops or diy's??

I really want to be able to run 225's this summer but I've gotta get
my fender
liner shaved first!!

 

What else would you like to know?

 

idealy I would like to know if there is a shop here in MN that can roll and pull fenders or a direction I should head in to find a shop.

but I will take any information as of now

 

back from the dead bump to conclude this thread for members who actually search.

i ended up buying prodrive p1 17's a couple weeks later, 225/45/17 with an et of about 52 (fairly high) they did rub, however i got an alignment from jeff the alignment guy, he put half a degree of camber in the rears and no more rubbing, i took off that inner rubber fender lip liner to gain a couple extra mm's. i believe if i had no negative camber at all, they would rub..alot. jeff (i think accidently) gave me about .07 degrees if positive toe out, on my right rear passenger side, it rubs a bit when i go over bumps and such, but its tollerable, and i think im going to ride it out and let my tire wear itself down so it will eventually quit rubbing.

 

baseball bat=jdm style

 

Sorry to bump an old thread, but i couldnt view some of the other fender rolling threads for some reason. Does anyone know who I can contact that has a 4x114.3 fender roller? I live down in Rochester and I need to get this done.

Thanks,
Dan