Flutter noise

Discussion in 'Modifications And Maintenance' started by WilliamSTian, Mar 25, 2011.

  1. WilliamSTian
    Offline

    WilliamSTian Active Member

    Likes Received:
    0
    Trophy Points:
    91
    I just started noticing a metal fluttering sound that comes and goes. It went on for about fifteen minutes while I was driving today. It sounds like it's coming from the passenger side heat vent. It was happening all the time but mostly
    Only when Moving, and I noticed it didn't matter if taken out of gear or in gear, the noise was just constant. Any ideas? Thanks.

    2006 STI

    TBE

    CAI

    GSbcs
     
  2. blackozone
    Offline

    blackozone Well-Known Member

    Likes Received:
    1,018
    Trophy Points:
    348
    Was it a very rapid ticking sound?
     
  3. WilliamSTian
    Offline

    WilliamSTian Active Member

    Likes Received:
    0
    Trophy Points:
    91
    Yeah, it did sound like that
     
  4. project/driven
    Offline

    project/driven Well-Known Member

    Likes Received:
    88
    Trophy Points:
    213
    Possibly a loose wastegate arm causing the wastegate to rattle in its seat. See if you can hear a similar sound when moving the arm, or even if it seems to move much at all it could probably be tightened.
     
  5. blackozone
    Offline

    blackozone Well-Known Member

    Likes Received:
    1,018
    Trophy Points:
    348
    Does your BCS have a rubber grommet between itself and the mounting point on your strut tower?
     
  6. WilliamSTian
    Offline

    WilliamSTian Active Member

    Likes Received:
    0
    Trophy Points:
    91
    It has a rubber washer between where it's tightened if that's what you mean. I was also reading up on the BCS noise, but why would it just start making that noise after 9 months without? I did notice it was a Little loose and could use tightening.
     
  7. project/driven
    Offline

    project/driven Well-Known Member

    Likes Received:
    88
    Trophy Points:
    213
    Can you manipulate it back and forth and get it to make any thing close to the same noise?
     
  8. idget
    Offline

    idget Want to pokéman? PM ShortytheFirefighter

    Likes Received:
    4,334
    Trophy Points:
    398
    When you reused the rubber grommet did you also reuse the metal inner sleeve?

    I would check the bcs, uppipe/exhaust manifold for a leak, and the wastegate (for flutter). Who is your tuner? Maybe they could take a look and listen?
     
  9. WilliamSTian
    Offline

    WilliamSTian Active Member

    Likes Received:
    0
    Trophy Points:
    91
    I tightened it and I'm going to see if that noise went away. I'll let you guys know, thanks for the help
     
  10. WilliamSTian
    Offline

    WilliamSTian Active Member

    Likes Received:
    0
    Trophy Points:
    91
    Tuned by Nate. It sounded like some type of fan mechanism struggling and causing a metal
    On metal sound is what I thought, but it could have been loosely tightened BCS, I'll let you guys know asap
     
  11. Nuke
    Offline

    Nuke Well-Known Member

    Likes Received:
    814
    Trophy Points:
    348
    If the sound is only there on cold mornings or such, probably bcs
     
  12. Bullwinkle
    Offline

    Bullwinkle Well-Known Member

    Likes Received:
    23
    Trophy Points:
    223
    If it sounds like a mini helicopter coming from your turbo area and occurs loudest during mid/partial boost (0-5 PSI) it's wastegate flutter or the BCS clicking.

    BCS clicking can be mitigated by a grommet between the BCS and mount point, WG flutter is perfectly normal nothing to worry about.