Got Problems....

Discussion in 'Modifications And Maintenance' started by putz, Aug 11, 2008.

  1. putz
    Offline

    putz Well-Known Member

    Likes Received:
    5
    Trophy Points:
    123
    Driving to bir yesterday, I every thing was fine, the car felt amazing, when...

    I pulled over for gas in baxter checked my oil, level was perfect. (hard to tell on our stupid dipsticks)

    I start going again up HWY371 and I get up to 65 mph and I let off the gas and I hear a sound comming from the pass. side of the engine bay, right from the turbo, I think my downpipe cracked or I crack my o2 bung on the bellmouth... the car only makes this noise under accelleration and at on start up.

    I frustrated....:roll::roll::roll:
     
  2. gc8
    Offline

    gc8 Well-Known Member

    Likes Received:
    287
    Trophy Points:
    268
    What sort of sound...?
     
  3. putz
    Offline

    putz Well-Known Member

    Likes Received:
    5
    Trophy Points:
    123
    sounds like an exhaust leak wistling througha multi layer exaust gasket????
    Maybe had a bolt rubbing on a exhaust housing cause I stupid and used the wrong length bolt?????

    I have to take the dp off tonight so I can see if the dp is craked.... I wrapped the piss out of the pipe, the exhaust housing, and the up pipe so I can't see if it is cracked...
     
  4. curly2k3
    Offline

    curly2k3 Well-Known Member

    Likes Received:
    1,140
    Trophy Points:
    473
    could be a crack or a leak... maybe if you did all the deletes and a K&N and stuff thats what you are hearing?
     
  5. Paul Revere
    Offline

    Paul Revere BANNED

    Likes Received:
    1
    Trophy Points:
    0
    Isn't all your stuff wrapped?
     
  6. putz
    Offline

    putz Well-Known Member

    Likes Received:
    5
    Trophy Points:
    123

    leak part... pretty sure...

    other stuff, not so much. I've been riding around like this for 2 weeks now.... and this sound is new as of yester day...

    I think I may order a down pipe tomorrow we'll see what I find tonight.:emo::emo:
     
  7. putz
    Offline

    putz Well-Known Member

    Likes Received:
    5
    Trophy Points:
    123

    yeah... it is. so it maybe hard to find any cracks.... this sucks:emo::emo::emo: so bad.
     
  8. putz
    Offline

    putz Well-Known Member

    Likes Received:
    5
    Trophy Points:
    123
    took the down pipe off, the turbo seems fine, down pip has no cracks, did notice sone carbon across the gasket face, looks like I did have a small exhaust leak.

    now, I have got a adjustable turbosmart dual port bov, I beleave it may have been adjusted past the "STOP!!! DON'T ADJUST PAST THIS HERE OR YOU MIGHT BLOW STUFF UP" line....

    (i feel like such a bone head) I'm going to go back and check for boost leaks tonight...

    do you think I can reuse my gasket to put the down pipe back on with?

    I know you have thought this so I'll say it....

    HEY, Putz.... put the stock bpv back on.....
     
  9. Bielke55
    Offline

    Bielke55 Well-Known Member

    Likes Received:
    66
    Trophy Points:
    283
    Dont reuse exhaust gaskets... They have a greater chance of leaking since most of them are a crush sort of gasket.
     
  10. putz
    Offline

    putz Well-Known Member

    Likes Received:
    5
    Trophy Points:
    123
    okay. I'll go get a new one
     
  11. putz
    Offline

    putz Well-Known Member

    Likes Received:
    5
    Trophy Points:
    123
    opinions on RTV silicone for BOV Gasket?
     
  12. Impreza 2.2 T AWD
    Offline

    Impreza 2.2 T AWD New Member

    Likes Received:
    0
    Trophy Points:
    0
    uhhh, i have a different engine but;

    I noticed a hissing sound from my car not to long ago, I just have to adjust the air conditioning vent to bi level and the sound goes away. Probably not the issue but that was my first thought.:)
     
  13. putz
    Offline

    putz Well-Known Member

    Likes Received:
    5
    Trophy Points:
    123
    it was the bung on the up pipe, the plug backed out.....
     
  14. Scuba Steve
    Offline

    Scuba Steve Well-Known Member

    Likes Received:
    4
    Trophy Points:
    173

    got your message....I'm so happy it was something easy. i can't remember what the size is....like 12/1.25 bolt that will fit in there
     
  15. putz
    Offline

    putz Well-Known Member

    Likes Received:
    5
    Trophy Points:
    123
    it looks like most egt sensors are 1/8" npt...

    but that was deisel.