Help Please!!

so i was driving and one of the little hoses popped off for my psi gauge in the engine i think.. i reattached it and when it blew off my dash has a steady check engine and traction control light on and a flashing cruise control light so idk if it will go off after a few times running or what like i cant even engage or disengage my traction control or my cruise control

 

or is there a main black tube that gets split for the clear tube going to my gauge

 

and im in coon rapids so if anyone wants to meet up and take a look if you know what to do im down

 

Did u try resetting your ecu or restarting you car?

 

i restarded the car but idk how to reset the ecu this is my first time owning a subaru

 

disconnect your battery and let it sit for a bit and the ECU will re-set.

 

So the problem occurred when the hose fell off correct? And you made sure that it connected back to it's original spot? You can reset the ECU by disconnecting the battery, hit the brake to drain any power left. Then reattach the battery. I don't know if it will help but it's worth a try. Also it would be a good idea to put the make model year mods etc.

 

Look like 03subyr old car. 08 wrx.

 

its just a vac leak like BroCo said reset your ecu, if you disconnect the batt and turn on your headlights it will clear it. If its a hard code the light will come back on asap if not dont think twice about it. When I reset my ecu I touch the + and - together its a hard reset and will bring it back to stock 100% if you have a tune it could screw up the tune.

 

thanks guys i will do this after work do i have to wait a certain amount of time when i have it disconnected or just wait til the car is drained of whatever power is left in it?

 

Is the car stock?

 

as far as i know yes. i bought it from the dealership i talked to 03subyr who owned it before me and
its back to stock as far as i know

 

You can disconnect the battery and step on the brake.

 

ok i will let you guys know how it goes i cant do it til 5 after im off work

 

Did you fix it? Can you take a picture of the engine bay where vacuum hose was connected and how you put it back together. I could help you but I am far away from CR. Just send me a picture and I could suggest on the solution. If you still have issues I could log your car and see if there is anything else going on. It seems like it's just vacuum line came off loose from BOV just put it back together and reset ECU.

 

he probably blew the hose by the tmic where the cupler is at.

 

Also curious if the your issue is resolved.

 

yes it was resolved on the 13th