HID issues with ddm on 03 wrx

Discussion in 'Modifications And Maintenance' started by issues, Dec 7, 2010.

  1. issues
    Offline

    issues Well-Known Member

    Likes Received:
    22
    Trophy Points:
    203
    I have no hi-beams(turn them on and I have no lights) and my fog lights wont auto come on with head lights. the kit was ddm slim duel 9007. But holy crap they light up everything.
     
  2. RexNEffect
    Offline

    RexNEffect Well-Known Member

    Likes Received:
    81
    Trophy Points:
    233
  3. matt_wong
    Offline

    matt_wong Well-Known Member

    Likes Received:
    0
    Trophy Points:
    201
    Do you have a picture of them on a wall
     
  4. 02blubru
    Offline

    02blubru Well-Known Member

    Likes Received:
    23
    Trophy Points:
    173
    they are the 9007 hi/ low beam kit?
     
  5. issues
    Offline

    issues Well-Known Member

    Likes Received:
    22
    Trophy Points:
    203
    Ive been there and there info is wrong for Subaru's the out side wires need to be switched. If you wire it the way they show you get fogs but no lights.

    I try to get some pics up.

    thats what my packing slip says
     
  6. Shibbs
    Offline

    Shibbs The Daywalker

    Likes Received:
    74
    Trophy Points:
    283
    This is a common problem on the bugeyes. Not sure how it has been fixed in the past.

    I know my 9003/H4 hi/lo kit from them works perfectly in my Aveo. :)
     
  7. Bielke55
    Offline

    Bielke55 Well-Known Member

    Likes Received:
    66
    Trophy Points:
    283
    It's because of how the system is wired on the car. You are only getting signal from one of the headlamps, leaving the other connector as an open circuit. With the way Subaru wired the car, that kit won't work.
     
  8. issues
    Offline

    issues Well-Known Member

    Likes Received:
    22
    Trophy Points:
    203
    I found a site where people were flipping the connection from the relay to the ballast. Ill try that when I get home.