any ideas on how to aim the lights because one of my lights is to low and the light beam isn't concentrated at the right place any help would be appreciated since i just got hids to so yea
On the reverse side there are two bolts heads that stick out, one tips it up and down, the other turns it left and right. 8mm i think and you don't have to turn them too much.
What i did to align mine was park on my drive way and I used the horizontal lines on my garage door to make sure they were aimed at the same height.
I notice a difference in a 1/4 turn.. look at your levels that are installed on the back side of the headlights. If not something is probably broken or stripped off the tracking, ishy.