need some help identifying what version of clutch disc and pressure plate i have

got the clutch kit i got from the guy off nasioc...welll lets just say one of the 3 parts i got is correct for sure not sure on the 2nd one and one of them is deff not what he said i was getting. the flywheel is the correct one, the pressure plate im having a hard time tracking down exactly what it is with the part number thats on it as it dosent seem to pull anything up (D057488) and the clutch disc i was told was a act disc and it is clearly written on the disc that it is exedy and to make matters worse from the info i have found apears to be a stock clutch disc (FJD024U)

Im having a hard time finding any info on the clutch disc and pressure plate i think part of it is because if the date stamped on the items are correct they are from 05

 

That looks like an ACT HD pressure plate and stock disc to me. Do you see an SB012 anywhere on the pressure plate?

 

not that i can see i looked all over it any idea where i should look. ive pretty much all but verified its a stock disk the mystery is the pressure plate. the guy on that is selling it said it is a act xtream pressure plate but when i confonted him about it being the wrong clutch disk he said he just got the car and thats what the previous owner had told him all that stuff was so he really has no clue.

 

anyone else have a opinion?

 

ACT uses Daikin (Exedy) disks, so it will look like an OEM disk regardless. Usually you can see "Daikin" on the disk.



You haven't posted pics of the actual pressure plate. Depending on how it looks, I'd be hesitant to run it if installing it is a big deal for you. If swapping the clutch is not your first rodeo, then give it a shot.


Otherwise I have a Hyper Single sitting here with decent life left for cheap.

 

The actual surface of the pressure plate is in fine condition no hotspots looks dang near new. I plan to get a brand new act hd street clutch disc and use that with that act pressure plate was just trying to find out what pp it is so I can get an idea of its clamping force and torque holding thresh hold

Sent from my Droid using Tapatalk

 

Also I saw daiken no where on the clutch disk

Sent from my Droid using Tapatalk

 

I don't know why you don't just run it since you've got it? Unless you've got like 350 wheel ft/lbs and plan on doing nothing but drag racing, you should be fine.

 

that is exactly the problem im going to be right about 325-350wht... haha

 

May i ask why you are using second hand items then? Obviously this is a HUGE concern to you, and since that's the case why didn't you just pony up the cash to buy what you KNOW can handle the powerz?
i was even a little concerned using a second hand clutch assembly on my car, since you want to trust people but you just never know the real miles/wear etc..

 

reason i went 2nd hand is because normally when someone says a item is something people tend to belive them unless they know other wise. i knew that the items he was selling would hold the power. but since have found out that he is not selling what he claimed to be. the other reason i went that route is because while i would love to pony up and buy the correct stuff all new thats a little hard when all you have is unemployment to fund this and its not a matter of o i need to replace something with what i know can handle the power its a mater of that what i had couldnt handle it and now makes my only means of transportation hard to drive so if i can fix it with next to new items(in this case i can vouch for that the the items even though listed as not correct were in the shape that i exspected) so by buying these items lightly used it saved me close to 400 dollers.

 

You're building all this stuff off unemployment?!?!?

Wow. I want my tax dollars back.

 

Not all of it the main of it was done before I lost my job in feb of 09

Sent from my Droid using Tapatalk

 

just a short updated after some rummaging around and talking to act it is verified that prictured above is the ACT HD pressure plate and it is the ACT Street clutch disk. Combination of the 2 able to hold 420crank torque. I found out this is the disc after ordering a new disc and cross refferancing part numbers. So if anyone is looking for a lightly used ACT Street clutch disk let me know

 

The reason america is in the state that its presently in.

 

yea i agree i certainly would not be on unemployment if i didnt need to be though..